How to install Bed Guard
Materials:
Peachskin: Peach skin fabric has a subtle softness: firm smooth and velvety. This versatile material is highly durable and robust. It offers zero stretch yet drapes like a dream. Steel: As far as building materials go steel is one of the most sustainable. It is not only environmentally conscious but economically strategic in its inherent longevity and durability. Steel is the most recycled material in the world. More steel is recycled each year than aluminum, paper, glass and plastic combined.
Plastic: We have taken as many steps necessary to limit plastic however our plastic is 100% recyclable and a tiny function for our Connector release button control.
1. First connect the 3 poles with anti-collision material.
2. Secondly, connect the 3 poles without the anti-collision material.
3. Unfold cloth cover and insert the connected upper horizontal bar and lower horizontal bar from the side.
4. Insert the left column and the right column into the cloth cover from top to bottom.
5.Connect the lower left connector into the groove an then connect the lower right connector.
6. Lock the left connector from the bottom to the top of the upper crossbar. (The same method applies to the right connector part).
7. Install the seat feet. Choose the best gear suitable for your depth of mattress: Start by putting the base under your mattress and with the gear hole is closest to the the top of your mattress but not above.
8. Insert the column into the Seat foot and screw on at the best position. The method applies to the other foot.
9. Place the guardrail on the bed and then slot under the mattress. Move the feet to a cross position to allow for stability. (Reinforcement is possible with adding additional side panels available in our store).
10. Lowering for Access When lowering the guardrail press the button marked with Push position firmly to raise the guardrail lift the upper crossbar and clip back into place.